Da die Umschaltzeit zwischen Netzbetrieb und Inselbetrieb weniger als 10 ms beträgt, wird die Last kontinuierlich versorgt.
| Battery specifications | Venus 5000-S1 | Venus 6000-S1 |
|---|---|---|
| Battery type | lithium ion battery, lead-acid battery | |
| Battery rated voltage | 48 V | |
| Battery voltage range | 42-58 V | |
| Battery capacity recommended | 5000 W | 5000 W |
| Maximum charging current | 100 A (settable) | |
| Maximum discharging current | 100A (adjustable) | |
| Charging curve (lithium ion battery) | BMS | |
| Charging curve (lead-acid battery) | 3-stage adaptive maintenance | |
| Depth of Discharge | lithium ion battery: 0-90% adjustable, lead-acid battery: 0-50% adjustable | |
| Maximum DC power of single channel MPPT | 3500 W | |
| Maximum input voltage | 600 V | |
| Start-up input voltage | 100 V | |
| Rated input voltage | 360 V | |
| MPPT voltage range | 120 V- 580 V | |
| Full load DC voltage range | 250 V-520 V | 300 V-520 V |
| Number of independent MPPT | 2 | |
| Number of DC inputs | 1/1 | |
| Maximum input current | 13 A/13 A | |
| Maximum short circuit current | 18 A /18 A | |
| Maximum AC power | 5500 VA | 6000 VA |
| Maximum output current | 25 A | 27.3 A |
| Nominal grid voltage | L/N/PE, 220 VAC, 230 VAC, 240 VAC | |
| Nominal AC voltage range | 180 VAC-276 VAC (according to local standard) | |
| Rated grid frequency | 50 Hz/ 60 Hz | |
| Grid frequency range | 45 Hz-55 Hz/54 Hz-66 Hz (according to local standard ) | |
| Active power adjustable range | 0~ 100% | |
| Total harmonic component (current) | <3% | |
| Power Factor | 1 (+/-0.8 adjustable) | |
| Maximum output current | 22.7 | 22.7 |
| Peak output power, time | 6000 VA,60 s | 6000 VA,60 s |
| Nominal output voltage, frequency | 220 V/230 V,50/60 Hz | |
| Voltage total harmonic distortion (@ linear load) | <3% | |
| Switching time | <10 ms | |
| European weighted efficiency | <97.30% | <97.50% |
| Maximum charging and discharging efficiency of battery | <94.00% | |
| MPPT efficiency | <99.9% | |
| DC reverse connection protection | available | |
| Ground fault monitoring | available | |
| Over-current protection | available | |
| DC switch | available | |
| Battery soft start protection | available | |
| AFCI protection | optional | |
| Lightning protection | Class III | |
| Ambient temperature range | General parameters -30 ~ + 60 ℃ (Rating reduction occurs when the ambient temperate rises above 45 ℃.) | |
| Stand-by loss | <10 W | |
| Topology | high frequency isolation | |
| Degrees of protection | IP65 | |
| Relative Humidity range allowed | 0~ 100% | |
| Communication | CAN 2.0/RS 485, Wi-Fi/GPRS (optional) | |
| Protection level | Class I | |
| Maximum altitude for product operation | <4000 m | |
| Connection mode of current sensor | external | |
| Weight | 27 kg | |
| Cooling mode | natural cooling | |
| Dimension (mm) | 540*380*185 | |
| Display | LCD & APP | |
| Warranty | 5 years (extendable) | |
| EMC | EN 61000-6-1, EN 61000-6-3 | |
| Safety regulations and standards | IEC62109-1,IEC62109-2 | |
| Grid-connection standard | IEC61727，IEC62116,IEC-61683，VDE-AR-N 4105, VDE V 0124-100，AS4777 | |
Most hybrid inverters can be programmed to function in four different modes:
Da die Umschaltzeit zwischen Netzbetrieb und Inselbetrieb weniger als 10 ms beträgt, wird die Last kontinuierlich versorgt.